Fronius Liner - Graphite - 10m Cut-To-Length, for Aluminum Wires up to 3/64"

This welding liner is a flexible graphite tube that guides the weld wire through the wire-feed system.

---

• The graphite liner is designed for Aluminum welding wire.
  • For Steel or Stainless Steel wires, we recommend the Fronius Steel Liner
• Supplied in a 10 m cut-to-length format. You will need to cut the liner to length for your specific system. 
• There are three places where it is recommended to routinely replace the welding liner on Fronius Push Pull Systems:
  1. Between the Wirefeeder and Splitbox
  2. Between the SplitBox and Torch (this is the main welding bundle)
  3. In the Torch Neck

---

For additional information, please view our Consumable Lists Page and the diagram below: